Screens, feeders & conveyors

Screening & Conveying

Drum screens, vibrating screens, feeders and conveyors that size, present and move material so every separator in the line performs.

  • Drum screens and trommels
  • Vibrating screens
  • Feeders and conveyors
The equipment

The equipment that makes a line work

Separators perform best on a sized, evenly spread feed. Drum and vibrating screens split material into fractions, feeders present it in an even layer, and chain and belt conveyors link each stage.

MHP specifies screening and handling equipment as part of the whole line, so capacities, transfer points and access work together.

The range

Equipment available through MHP

Screens, feeders and conveyors are sized to your material and the separators they serve.

  • 01

    Drum screens and trommels

    Rubber-driven drums with internal cleaning, for wet and mixed material.

  • 02

    Vibrating screens

    Flat-deck sizing of dry, free-flowing fractions ahead of separation.

  • 03

    Hooded hoppers and apron feeders

    Receive bulky material and meter it into the line.

  • 04

    Belt conveyors

    Troughed and flat belts to link each stage.

  • 05

    Also available

    Vibrating feedersChain conveyorsCleated and inclined belts

Typical applications

  • Shredder infeed and outfeed
  • Sizing ahead of eddy current and sensor sorting
  • Incinerator bottom ash and slag
  • Construction and demolition waste
  • Household and commercial waste
  • Wet and sticky material
Technology in detail

Sizing, feeding and handling

Getting material to the separator at the right size and in the right layer is where much of the recovery is won.

Sizing

Drum screens and trommels

A rotating perforated drum splits material into size fractions. Rubber drive wheels keep vibration and noise low, and an internal cleaning device stops the holes blinding.

  • Handles wet, sticky, dirty and mixed material
  • Simple to install, operate and maintain
  • Low power use for the throughput
  • Optional bag-opening device
Drum Ø1,200–2,000 mm2–12 m longApprox. 12–85 m³/h
Flat-deck sizing

Vibrating screens

Vibrating screens size dry, free-flowing material on one or more decks, so each fraction reaches the separator best suited to it.

  • Single and multi-deck options
  • Sharp sizing ahead of sensor sorters
  • Even presentation of each fraction
  • Specified to fraction size and throughput
Presentation

Vibrating feeders

Vibrating feeders meter material and spread it into an even layer, so separators and sorters see one piece at a time.

  • Even, controllable feed rate
  • Improves eddy current and sensor sorting results
  • Can be integrated with a drum magnet
  • Variable speed control
Handling

Chain and belt conveyors

Chain conveyors take heavy, sharp scrap and bale feeding. Belt conveyors in troughed, cleated and inclined forms link screens, magnets and separators.

  • Heavy-duty chain conveyors for shredder infeed
  • Belt conveyors to suit each transfer point
  • Access walkways and guarding designed in
  • Matched to line capacity
Typical specifications

Drum screen sizes

A guide to the sizes available. Every unit is specified to your feed, so final figures are confirmed at quotation.

Drum screens (trommels)

DrumLengthPowerOutput
Ø1,200 mm2 m4.0 kW12 m³/h
Ø1,200 mm6 m5.5 kW20 m³/h
Ø1,500 mm9 m11 kW50 m³/h
Ø1,500 mm12 m18.5 kW65 m³/h
Ø1,800 mm12 m22 kW75 m³/h
Ø2,000 mm12 m30 kW85 m³/h

Manufacturer data. Capacity depends on material, bulk density, particle size and feed preparation, and is confirmed by trial or calculation for your application.

Why buy through MHP

More than a machine on a lorry

  • Matched to your material

    The machine is selected around your feed, throughput and target product, not a catalogue.

  • Installed properly

    Installation, integration and commissioning are carried out by our own engineering team.

  • Supported afterwards

    Spares, wear parts and site support are available through MHP.

Getting a quote

Three steps to a quote

  1. 01Tell us the material

    What it is, its size range and what you need to recover or remove.

  2. 02Share your site details

    Throughput, available space and any existing equipment.

  3. 03Receive options

    MHP recommends a suitable machine and sends a quote. Prices are given on request.

Your next step

Ready to talk screening and conveying?

Tell us about the material, the opportunity or the challenge. No lengthy brief needed.